![Saw Switch Knob Steampunk Geiger Counter](https://www.imagesco.com/articles/geiger/steampunk_images/saw_switch_knob.jpg)
Assembling these parts onto the case is a multi-step process. We first attach the plastic acrylic saw. The box is made of a plastic resin that is easy to machine. Locate a position on your case for the saw switch and drill a hole in the case, see figure 8.
![Saw Switch Drill Steampunk Geiger Counter](https://www.imagesco.com/articles/geiger/steampunk_images/saw_switch_drill.jpg)
Next place the saw assembly on the case using the hole you just drilled, see figure 9.
![Saw Switch Installed Steampunk Geiger Counter](https://www.imagesco.com/articles/geiger/steampunk_images/saw_switch_installed.jpg)
Buy DIY Steampunk Components Here